- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can I bridge a Verizon Fios router like the actiontec with another unit like Cisco router in the same LAN? If so what do I need to do in setup?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
below are some ways for you to do what you would like to do. just keep in mind that those are advanced set ups and not supported over the phone or by technician at verizon, so you can do them at your own risk type of thing, and the only support you'll really have is from online users. If your a DIY (Do it yourself) kinda guy, then these should work,
http://www.dslreports.com/faq/verizonfios/3.0_Networking
You'll want to pay special attention to the "what are the trade off's" section. If you have FiOS TV you may not be able to do some of the setups that you want. there should be one in there that will work for you.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks alot. I'm a Home Automation tech with some IT experience. Already put 3 WAPs in this home already and have had problems with the Actiontec router its coax input breaking and have had this at a few homes. Will see if owner wants to try this.