Printing from Lexmark X4650 wireless printer.
HairyHarry1
Newbie

Previously had Comcast and had no problem printing to my wireless Lexmark X4650.

Since having FIOS Triple Play installed, I can only print when I hook laptop to printer with a USB cable.

Have chatted with Verizon and also talked in person and cannot figure it out. I also have a Roku device

installed on TV and this works fine. Any one out there with this problem and a simple solution.

Thank You in advance.

HH

0 Likes
Re: Printing from Lexmark X4650 wireless printer.
jackmcgann
Specialist - Level 1

In my case, I had to "drop" my router from performance mode to compatability mode.

0 Likes
Re: Printing from Lexmark X4650 wireless printer.
HairyHarry1
Newbie

How would you do that?

Directly from the M1424WR Verizon router or from your laptop?

Thank you in advance for your info. HH

0 Likes
Re: Printing from Lexmark X4650 wireless printer.
HairyHarry1
Newbie

How would you do that?

Directly from the M1424WR Verizon router or from your laptop?

Thank you in advance for your info. HH

0 Likes
Re: Printing from Lexmark X4650 wireless printer.
jackmcgann
Specialist - Level 1

Log in to your router from a computer. Mode is one of the advanced wireless settings, I believe.

0 Likes
Re: Printing from Lexmark X4650 wireless printer.
HairyHarry1
Newbie

Sorry, I have tried to log into my router with no luck.

When I go to computer, my wireless router does not show up. HH

0 Likes
Re: Printing from Lexmark X4650 wireless printer.
dslr595148
Community Leader
Community Leader

#1 Go 192.168.1.1

#2 For the log-in info, copied from the post number 9 in thread

http://forums.verizon.com/t5/FiOS-Internet/Problem-with-WIFI-slow-speeds-and-Verizon-Actiontec-MI424...


When the Verizon tech sets up the Actiontec MI-424WR the login is (should be):

admin              (login id)

password1    (password, all lower case ending in the number 1)

Now, if you have "defaulted" you Actiontec through some "reset sequence" then it changes:

admin             (login id)

password    (password, all lower case NOT ending in the number 1)

If you have actually "defaulted" your Actiontec you'll know it because the first time you log in it will request your change password.  It may also default back to 'password' following a firmware upgrade (I'm not sure).

And don't get confused because for every password character that you type, the text input field will show three stars instead of one as you would expect.

To "default" your router

http://www22.verizon.com/support/residential/internet/fiosinternet/networking/troubleshooting/questi...

To see what Verizon says your default password is:

http://www22.verizon.com/support/residential/internet/fiosinternet/networking/troubleshooting/questi...

Summary:

login is always 'admin', then try"

password1   (set by tech maybe)

password (default)

<serial number> from label (see second Verizon link above)





0 Likes