The verizon web site lists 40 codes for use in programming the motorola remote to control a panasonic TV. There must be a better way to match a code to a tv than to try each of 40 in turn.
Help/advice sought
Hi oldwoodboats, there is a way to search for codes with your remote. I'm assuming you actually have the Philips remote, which is the latest model we use, because the older Motorola remote only has about 4 codes for panasonic tv's. Here is how you search for a code with your remote control:
1) Power on the TV. 2) Press and hold TV device key. While holding down the TV key, press OK. 3) Release both keys. The device keys will blink twice. 4) Press 9-2-2. 5) Point the remote at the device and press the PLAY button. 6) Press FF. Every time you press FF, the remote sends a new power-off command to the TV. Keep pressing FF until the TV powers off. You can press REW to go back to the previous code. 7) When the device turns off, press OK to store this code. (Note: if you reach the end of the code list the TV button will blink twice and return to normal operation. You can also hit Exit to cancel the device code search.)
If you do still have the Motorola remote, take a look at this site. It has all the remote controls we've ever used:
http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/SetUp.htm
Start a new topic or ask questions in the open forum.
