FiOS TV Technical Assistance

[#1]

I have the Phillips 144 Remote. I wish to program one of the Colored bottons at the bottom of the remote by learning from the output of an other remote.

I have a Panasonic TC_P50UT50TV.

Today I successfully programed my Phillips 144 remote for this TV.

There is one TV function that I need. It isn't obvious if it is available already on the Remote. Tried most of the buttons-none seemed to act upon the INPUT control of the TV.

The single function I wish to have on the REMOTE;

To be able to vary the TV's INPUT [such as HDMI 1,HDMI 2,AV1,AV2]

Can I use the colored buttons,? If so, how can I program those buttons by LEARNING from my TV's remote?

If I can't program the colored buttons, is there any other button that I can program for changing the TV's INPUT?

[#2 · Accepted solution]

Assuming you have programmed the remote correctly to turn on and off your TV, have you tried hitting the TV button at the top of the remote and then the A/V button (also labeled Input) at the bottom? Works for me on all of my TVs.

__________________________________
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

[#3]

Thanks for the suggestion.

It works!

Exactly as you told me.

---

Justin wrote:

Assuming you have programmed the remote correctly to turn on and off your TV, have you tried hitting the TV button at the top of the remote and then the A/V button (also labeled Input) at the bottom? Works for me on all of my TVs.

__________________________________
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

---