Remote codes for Sherwood A/V reciever
ceksenior
Enthusiast - Level 1

The 1 remote code in the instruction manual for the remote control not working. Are there any more??

0 Likes
1 Solution

Correct answers
Re: Remote codes for Sherwood A/V reciever
Justin46
Legend

Here is a link to a Verizon web page with codes for a variety of A/V receivers:

http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote%20Controls/SetUp/QuestionsOne/122842.htm

I see three codes there for Sherwood, hopefully one will work: 1104, 3632, 3724.

__________________________________
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

View solution in original post

Re: Remote codes for Sherwood A/V reciever
Justin46
Legend

Here is a link to a Verizon web page with codes for a variety of A/V receivers:

http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote%20Controls/SetUp/QuestionsOne/122842.htm

I see three codes there for Sherwood, hopefully one will work: 1104, 3632, 3724.

__________________________________
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

Re: Remote codes for Sherwood A/V reciever
spacedebris
Master - Level 2

If those codes dont work, then the only thing left to try is to do a scan....

Searching for a Device Code

Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.

Press and hold the device button for the device you turned on in step 1 (DVD, AUX, TV, STB) and press OK. Release both buttons.

The mode buttons blink twice.


Press 922.


Point the remote control toward the device you are setting up and press the upper part of the Play button.


Press the Fast Forward button. If the device you are setting up does not turn off, keep pressing the Fast Forward button until the device powers off. (You can use the Rewind button to go back, if necessary.)


When the device powers off then you've found the correct code for that device. Press OK to assign the code in your remote control.

Note:
There are over 200 possible combinations for TV and DVD codes. The most common codes are tried first but you may still need to press the Fast Forward or Rewind buttons over 200 times to find the correct code for your device.

If you reach the end of the list of codes, the entire remote flashes twice and returns to normal operation. You can exit programming at any time by pressing the Exit button.

0 Likes
Re: Remote codes for Sherwood A/V reciever
ceksenior
Enthusiast - Level 1

Awesome!  Thanks Justin!

0 Likes