Customers With Disabilities
Reply
Contributor
ajmboy
Posts: 1
Registered: ‎12-02-2009
0 Kudos

Universal Remote with Emerson 32" LCD Not Working

I just bought an Emerson 32" LCD HDTV  and can't get the remote programmed for the TV.  I tried all the codes in the manual and online, but nothing worked.  I also tryed to program it manually, and still nothing worked.  I tried the following codes:

 

0181   0263   0490   0207   0205   0198   0650   3005   3008   3010   3011   3012   3013   3015   3025   3031   3186   3203   3204   3218

 

It does not work...are there other verizon remotes or new codes?

 

Silver Contributor III
PJL
Posts: 1,910
Registered: ‎08-07-2008
Location: Long Beach, California
0 Kudos

Re: Universal Remote with Emerson 32" LCD Not Working


ajmboy wrote:
I just bought an Emerson 32" LCD HDTV  and can't get the remote programmed for the TV.  I tried all the codes in the manual and online, but nothing worked.  I also tryed to program it manually, and still nothing worked.  I tried the following codes:

 

0181   0263   0490   0207   0205   0198   0650   3005   3008   3010   3011   3012   3013   3015   3025   3031   3186   3203   3204   3218

 

It does not work...are there other verizon remotes or new codes?

 


The user guide I have for the FiOS remote shows 0154, 0236, 0463, 0180, 0178, 0171, 0623, and 0185 for Emerson TVs. 

 

Platinum Contributor I
Hubrisnxs
Posts: 5,110
Registered: ‎07-22-2009
0 Kudos

Re: Universal Remote with Emerson 32" LCD Not Working

[ Edited ]

the ones from the user guide work pretty well,

Bronze Contributor I
abhi_col
Posts: 147
Registered: ‎11-18-2009
0 Kudos

Re: Universal Remote with Emerson 32" LCD Not Working

If none of the codes worked, try this.

 

Instructions for philips remote. the remote with the big red fios TV button.

 

Before you begin, the TV should be ON and remote pointing towards the TV

 

1) Press TV button and hold it down. While holding TV button down, press OK button. Release both keys at the same time.( All the 4 device keys on the top of remote should flash)

2) Press the numbers 9-2-2.

3) Press the upper part of PLAY button once.

4) Continue pressing FASTFORWARD button slowly again and again until the TV turns off. (This step is searching for correct code as the FASTFORWARD button is pressed)

5) If the TV turns off, press OK button. It will store the code.

 

Good luck. :smileyhappy:

 

Contributor
kiwidrop
Posts: 5
Registered: ‎01-17-2010
0 Kudos

Re: Universal Remote with Emerson 32" LCD Not Working

[ Edited ]

I've been having the same problem. Have you found a solution yet? I also tried the 9-2-2 thing for all the codes in the book and nothing worked.

Contributor
ncman
Posts: 1
Registered: ‎06-04-2010
0 Kudos

Re: Universal Remote with Emerson 32" LCD Not Working

None of the codes works for my Emerson 32" (bought from Wal-Mart about 2.5 years ago). Tried running 922 as well.  So now we have a Direct TV remote that won't control its TV and a FIOS remote that won't control its TV.  Apparently, this is rocket science.

Gold Contributor I
spacedebris
Posts: 1,692
Registered: ‎05-17-2009
0 Kudos

Re: Universal Remote with Emerson 32" LCD Not Working

Emerson is a "generic" TV. Built by the lowest builder. A lot of the "generic" TV's (emerson, symphonic, radio shack, etc) use IR frequecies that are unique rather than the "standards" used by many other tv's. Its not possible to make every universal remote work on every tv. They just work on "most" tvs. If the VZ remote doesnt work for it, you can always purchase a universal remote that does work for your TV and then program IT for the verizon box. The verizon box works on standard motorola codes.




====================================================================================

Error exists between keyboard and chair.
 

Shop FiOS

  • FiOS Internet
  • FiOS TV
  • FiOS Digital Voice
  • FiOS Deals

Account & Services

Email, News & TV

  • Check Email
  • Announcements

Support Tools