What is STB Remote Control code for the Magnavox 15MF400T/37 set?
oldvzdude2
Newbie

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

Tags (1)
0 Likes
Re: What is STB Remote Control code for the Magnavox 15MF400T/37 set?
VZ_JoeD
Contributor - Level 1

Program TV remote code
1) Look up the four-digit code for the TV below. 2) Press and hold the TV device key. While holding the TV key, press the OK key. 3) Release both keys at once. The four device keys will blink twice. 4) Enter the four-digit code. After a short delay, the TV key will

blink three times. 4) Test new device code by pressing POWER. If TV responds (turns off), the device configuration is successful. If device does not respond, then repeat steps 2-4 with the next code in the list. If the remote does not recognize the code, the LED will turn off. If none of the codes work, do a search for the device code.

 

0057, 0081, 0205, 0733, 0829, 1281, 1481, 3005, 3006, 3018, 3046, 3047, 3056, 3098, 3102, 3145, 3198, 3212, 3218

0 Likes
Re: What is STB Remote Control code for the Magnavox 15MF400T/37 set?
Telcoguru
Master - Level 1

FiosTechJoe beat me to it.

0 Likes
Re: What is STB Remote Control code for the Magnavox 15MF400T/37 set?
oldvzdude2
Newbie

I have already tried those things with no success, as did the VZ installer.  Got any other ideas?

Thanks,

oldvzdude

0 Likes
Re: What is STB Remote Control code for the Magnavox 15MF400T/37 set?
VZ_JoeD
Contributor - Level 1

1292, 1481, 0081, 0057, 0733, 0829, 1281, 0057, 0081, 0205, 0733, 0829, 1281, 1481, 3005, 3006, 3018, 3046, 3047, 3056, 3098, 3102, 3212, 3218, 3154, 3198 3040, 3046, 3047, 3067, 3071, 3085, 3095, 3102

Try and reset your remote to factory defaults first.

---------------------------

Reset remote to factory defaults
All previous programming will be lost 1) Press and hold the STB key. 2) While holding down the STB key, press OK. 3) Release both keys. The Devices Keys will blink twice. 4) press 9-0-0. The STB key will blink 3 times to indicate sucess in programming.

 

 

Mute

will not work until you program

the remote


0 Likes
Re: What is STB Remote Control code for the Magnavox 15MF400T/37 set?
oldvzdude2
Newbie

I reset the remote and and entered the TV programming sequence which operated as expected with the codes lower than 3XXX.  Upon entering the 3XXX codes the TV button no longer blinks 3 times, instead all 4 of the "device" keys blink 1 time.  Any other suggestions?

Thanks,

oldvzdude

0 Likes
Re: What is STB Remote Control code for the Magnavox 15MF400T/37 set?
spacedebris
Master - Level 2

If none of the codes worked, your only other option is to do a scan.

 

WHAT IF NONE OF THE CODES WORKED?

If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the

TV

key in step 2 and 3.) 

1. Turn on your TV.

2. Press and hold the TV key.

3. While holding down the TV key, press OK

4. Release both keys. The Device Keys will blink twice.

5. Press 9 - 2 - 2

6. Point the remote at the TV.

7. Press the play button 

8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.

9. When the TV turns off, you have found the right code. Press OK  to store this code.

Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT 

If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.

0 Likes