Bridging router
hitmehhh
Contributor - Level 1

I had my westell 6100 and linksys wrt54g bridged before there was a problem on our area with Verizon service yesterday.Now my connection is not bridged. It pretty much seems the same ,should I just leave it alone? I have no idea how to set it back with a bridge as the last time I did it a Verizon tech led me through it over the phone.

0 Likes
Re: Bridging router
dslr595148
Community Leader
Community Leader

#1 Disable the Walled Garden Feature (if it exist in your modem combo), by following the directions at

http://www.dslreports.com/faq/16040

#2 Then put the modem into bridge mode, by following the directions at

http://www.dslreports.com/faq/13600

#3 If you have any questions, please ask.

Re: Bridging router
hitmehhh
Contributor - Level 1

For some reason I cannot log in to the modem when I click on VC.

0 Likes
Re: Bridging router
dslr595148
Community Leader
Community Leader

Is your modem combo usng the white and blue or the red and black firmware?

0 Likes
Re: Bridging router
hitmehhh
Contributor - Level 1

White and blue

0 Likes
Re: Bridging router
hitmehhh
Contributor - Level 1

When I connect the modem directly to the computer and get to where I need to click on VZ the user name and password comes up but admin , password or my actual user name and password do not work

0 Likes
Re: Bridging router
dslr595148
Community Leader
Community Leader

#1 Should you need a login, try the following information:

admin/password

admin/password1

admin/admin

admin/admin1

Your Verizon Username and Password.

admin/serial number.

By serial number, I did not mean type in serial number. I mean type in the serial number found on the bottom of the router.

#2 If that does not work,

a) Reset the modem combo back to the defaults.

I believe that is done by pressing the reset button for at least 10 seconds.

b) Then you can log-in using:

admin/password

admin/password1

admin/admin

admin/admin1

Your Verizon Username and Password.

c) Then you can change the password to what you want it to be.

0 Likes