|This is the last time your account was accessed.|
Connect with us
Watch thousands of your favorite TV shows and movies On Demand and Live. Rent or buy your favorites and watch them on any device. Or, check what's on tonight and program your DVR. You can do it all!
Watch Free TV & Movies
Rent or Buy
Set your TV Viewing Experience
Check out this personalized, real-time feed featuring the latest content and entertainment from around the Web including new headlines, sports, entertainment and more.
01-25-2010 03:06 PM
Please help me. I have spent hours trying to get my Linsys WRT 160N wireless router to work with my Westell 6100 modem (E90-610015-06). I have tried the suggestions from dslreports, so please do not send me a link to this website. Setting the modem to bridge and setting the wireless router to PPPoE does not work. Also, changing the IP address on the router does not work. Does anyone have any other ideas?
01-25-2010 04:28 PM
changing the IP Address does work.
You might be doing something differently.
Let me tell you a few things to check
You have to open your NIC properties
make sure its set like this
Then plug your PC into your linksys, or make sure you connect to it wirelessly.
put in 192.168.1.1
Change the Local IP Address on the first page to reflect 192.168.0.1.
Then plug your linksys into the westell.
reboot the linksys, then reboot the pc (or you can do a repair, or an ipconfig/release and ipconfig/renew in DOS) and as long as the westell is online, everything else will pass internet traffic through
I hook those up all the time the same way and they work just fine.
if it doesn't work again this time let us know, and KEEP IN MIND this is how it should ultimately look
Wall -> westell -> linksys plugged into the yellow ethernet port, and plugged into where it says WAN on the linksys
then your PC wirelessly connects to the linksys.
01-26-2010 02:17 PM
Also keep in mind that is normally the easiest way to do it, but if you want other ways to do it you can go here.
01-27-2010 08:48 AM
While not the same router, this may help
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.