- « Previous
-
- 1
- 2
- Next »
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
dsl, I cannot thank you enough for the amount of time and help you've provided. I will check all these things later tonight when I'm at home and will post back!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
dsl, I tried your suggestions and everything seems to be working now! I've tried it on my cell phone both on wi-fi and on 3G and it connected both times. When I put the second router on the network a couple of weeks ago I never set the DHCP range on the Actiontec as you suggested. So when I went in and fixed that I was able to connect. I gotta give it a shot at work tomorrow now and verify.
Again, thanks a lot for all your help. I wish all tech help was as efficient as this!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've tried to follow the various online instructions but still cannot get internet access from the Cisco e4200 I have connected from the Internet port of the e4200 to a LAN port on the Actiontec MI424. Here's what I have configured. Help would be much appreciated!
Actiontec:
IP address 192.168.1.1
Subnet mask 255.255.255.0
DHCP server range 192.168.1.200 to 254
Wireless radio turned off
Cisco e4200:
Internet connection via DHCP
IP address: 192.168.1.200
Subnet: 255.255.255.128
DHCP IP Address range: 192.168.130-179
No static DNS server set
As you can see the e4200 has an IP address in the range of the Actiontec DHCP range, but is serving out addresses on a different subnet.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@CalWilder wrote:I've tried to follow the various online instructions but still cannot get internet access from the Cisco e4200 I have connected from the Internet port of the e4200 to a LAN port on the Actiontec MI424. Here's what I have configured. Help would be much appreciated!
Actiontec:
IP address 192.168.1.1
Subnet mask 255.255.255.0
DHCP server range 192.168.1.200 to 254
Wireless radio turned off
Cisco e4200:
Internet connection via DHCP
IP address: 192.168.1.200
Subnet: 255.255.255.128DHCP IP Address range: 192.168.130-179
No static DNS server setAs you can see the e4200 has an IP address in the range of the Actiontec DHCP range, but is serving out addresses on a different subnet.
No. ITs the same subnet. different range. And not allowed. A different subnet would be to have an address such as 192.168.2.1. or 10.0.0.1
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you very much MVP. Works fine now.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
do you have any issues viewing HBO over the HD Homerun?
- « Previous
-
- 1
- 2
- Next »