rnquesada wrote:
I want to switch from a WiFi ... to ... hardwire ... [to] ..directly connect my internet enabled device ... I have to connect the Ethernet cable from the device directly to a wall plug-in. What does it take? Does the signal degrade when there is a farther distance ...
_____________________________________________________________________________________________________
Essentially you just need to run the cable (Cat 5e or better) from one location to the next, terminate the cables with RJ-45 plugs (not obvious, but then not all that difficult), and then plug in. In typical applications the distance between the router and the device is of no consequence.
Good viewing from "The Garden State"
... if someone helps, give "Kudos" ... when an answer works, mark that answer "Solved"
