×

Switch Account

Can you bypass ONT with sfp router?

Can you bypass ONT with sfp router?

SOLVED
Reply
Contributor spocklogical
Contributor
Posts: 2
Registered: ‎04-25-2019
Message 1 of 11
(1,765 Views)

I was wondering if it's possible for residential customers to use they're own fiber terminating device.

I have a router with gigabit sfp ports and I can get an sfp module for whatever length of fiber Virizon uses for my location.

10 REPLIES 10
Gold Contributor VII
Gold Contributor VII
Posts: 4,685
Registered: ‎10-18-2016
Message 2 of 11
(1,748 Views)

@spocklogical wrote:

I was wondering if it's possible for residential customers to use they're own fiber terminating device.

I have a router with gigabit sfp ports and I can get an sfp module for whatever length of fiber Virizon uses for my location.


Verizon does not allow what you want to do. They run the fiber up to their ONT then ethernet /coaxial from the ont to your home router. 

Contributor spocklogical
Contributor
Posts: 2
Registered: ‎04-25-2019
Message 3 of 11
(1,745 Views)
Do you know if they use a proprietary protocol for the the fiber transmission, or if it's just a policy/terms of service restriction?
Gold Contributor VII
Gold Contributor VII
Posts: 4,685
Registered: ‎10-18-2016
Message 4 of 11
(1,734 Views)

@spocklogical wrote:
Do you know if they use a proprietary protocol for the the fiber transmission, or if it's just a policy/terms of service restriction?

I am not an engineer nor do i work for verizon. Verizon as a business supplies the fiber and the ONT to the home or business. It is not the property of the consumer even though it is either attached to your home or in your home. It is property of verizon.

like any company they would not want anyone tampering with their property.

 

I would hazard a guess its a business decision.

Gold Contributor I Gold Contributor I
Gold Contributor I
Posts: 1,117
Registered: ‎06-24-2018
Message 5 of 11
(1,728 Views)

No. Can't be done. Verizon uses one fiber with a SC APC connector that uses different wavelengths. SFP modules use two fibers one send and one receive with an LC connector. 

Also SFP modules on routers and switches are typically used for connecting a router/switch to another switch that is in another building or a long cable run that would be outside of the 325 feet ethernet limit. No real use in a residential setting. 

The ONT is on Verizon's side if the demarc. You don't have to rent it from them. 

Platinum Contributor II Platinum Contributor II
Platinum Contributor II
Posts: 7,582
Registered: ‎11-04-2008
Message 6 of 11
(1,696 Views)

There is some technical issue.

Remember that the ONT is designed to offer Internet, TV and Phone.

They have control over the ONT to enable each of the services.


If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
Contributor cyberzero
Contributor
Posts: 1
Registered: ‎06-12-2019
Message 7 of 11
(1,296 Views)

Hi jonjones, similar question here.

 

Is that means the DHCP mode is the ONLY mode I can choose on my own router, even i am planning to use some "advanced/upgraded" routers from Ubiquiti/MikroTik? Now i am using my own Asus AC68U router right after the ONT (model:I-21M-L) via ethernet cable, without using any VZ router between them.

 

If DHCP is not the only option, please advise if any better mode (PPPoe, etc.)should be chosen in my own router setting? Thanks in advance.

Gold Contributor VII
Gold Contributor VII
Posts: 4,685
Registered: ‎10-18-2016
Message 8 of 11
(1,279 Views)

You don’t need to use a verizon router for internet only service. DHCP is obtainable on any router be it verizons branded ones or your own router. You can initialize any settings on your own router for your home network. On verizon routers alas they pretty much lock them down and of course verizon has a protocol where they access your router at will. Both for updates and support services. Thats why verizon does not support customer owned routers.

 

however for the new fios one tv you will need a verizon Quantum router. If you have tv service. Other than that verizon supplies the fiber to the home to the ont and then the connection to the router.

Contributor akaguyver
Contributor
Posts: 1
Registered: ‎07-31-2019
Message 9 of 11
(728 Views)

"Also SFP modules on routers and switches are typically used for connecting a router/switch to another switch that is in another building or a long cable run that would be outside of the 325 feet ethernet limit. No real use in a residential setting. "

 

thats not true

sfp and sfp+ modules are often used in short runs for 10gb and 1gb connections. there are sfp rj45 modules that you can plug regular cat6 patch cables to as well as fiber sfp modules

Gold Contributor I Gold Contributor I
Gold Contributor I
Posts: 1,117
Registered: ‎06-24-2018
Message 10 of 11
(711 Views)

@akaguyver wrote:

"Also SFP modules on routers and switches are typically used for connecting a router/switch to another switch that is in another building or a long cable run that would be outside of the 325 feet ethernet limit. No real use in a residential setting. "

 

thats not true

sfp and sfp+ modules are often used in short runs for 10gb and 1gb connections. there are sfp rj45 modules that you can plug regular cat6 patch cables to as well as fiber sfp modules


Yes it is true and what you said is also true. There are many different uses for SFP modules but connecting to a Verizon ONT is not one of them. Which is the point I was trying to make to the original poster. I didn’t think is was necessary to go over all the different ways to use SFPs. 

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.



Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.