How do I block a port?
molitar
Enthusiast - Level 3

I want to block some ports like 139 or at least stealth them for security but I tried to add the port to internet blocking port and it did not work Shields Up still shows port open.

How do I block the port in the MI424 router?

0 Likes
1 Solution

Correct answers
Re: How do I block a port?
Hubrisnxs
Legend

try the following.

-Go to ADVANCED>Port Forwarding Rules page: Scroll to bottom, click "Add"

EDIT SERVICE: SERVICE NAME: aaa-securityblocking
Note - This makes "Global Service". NO spaces are permitted in service name

SERVICE DESCRIPTION: blocks port 139

SERVER PORTS: select "ADD SERVER PORTS"

EDIT SERVICE SERVER PORTS: PROTOCOL: TCP
EXCLUDE: (uncheck)


SOURCE PORTS: ANY

DESTINATION PORTS:
SINGLE 139

EXCLUDE: (uncheck)

-Under "FIREWALL SETTINGS>Advanced Filtering under "Broadband Connection (Coax) Rules click "Add"

ADD ADVANCED FILTER: MATCHING:

SOURCE ADDRESS: any

DESTINATION ADDRESS: any

PROTOCOL: select "aaa-security
blocking" which was added to this list by above procedure

OPERATION: drop

LOGGING: LOG PACKETS
MATCHED BY THIS
RULE: (uncheck)

WHEN SHOULD THIS RULE
OCCUR? Select "Always"

You may also want to do the same for the UDP as well

View solution in original post

Re: How do I block a port?
Hubrisnxs
Legend

try the following.

-Go to ADVANCED>Port Forwarding Rules page: Scroll to bottom, click "Add"

EDIT SERVICE: SERVICE NAME: aaa-securityblocking
Note - This makes "Global Service". NO spaces are permitted in service name

SERVICE DESCRIPTION: blocks port 139

SERVER PORTS: select "ADD SERVER PORTS"

EDIT SERVICE SERVER PORTS: PROTOCOL: TCP
EXCLUDE: (uncheck)


SOURCE PORTS: ANY

DESTINATION PORTS:
SINGLE 139

EXCLUDE: (uncheck)

-Under "FIREWALL SETTINGS>Advanced Filtering under "Broadband Connection (Coax) Rules click "Add"

ADD ADVANCED FILTER: MATCHING:

SOURCE ADDRESS: any

DESTINATION ADDRESS: any

PROTOCOL: select "aaa-security
blocking" which was added to this list by above procedure

OPERATION: drop

LOGGING: LOG PACKETS
MATCHED BY THIS
RULE: (uncheck)

WHEN SHOULD THIS RULE
OCCUR? Select "Always"

You may also want to do the same for the UDP as well

Re: How do I block a port?
molitar
Enthusiast - Level 3

Thank you

0 Likes
Re: How do I block a port?
sharpie958
Newbie

I can't seem to find these same options on my Quantium router.  I did the first part, but the second part with the firewall, I need some help.

0 Likes
Re: How do I block a port?
Paul99992
Newbie

I have quantum G-1100 router, it looks this procedure doesn't work or they have some bugs they need fix it, as per verizon gateway technical support. Sad (: . They were suggesting 3rd party routers and configure it.  Not a easy procedure though!

0 Likes
Re: How do I block a port?
LawrenceC
Moderator Emeritus

As this thread is now over two years old, it will be locked in order to keep discussions current. If you have the same or a similar question/issue we invite you to start a new thread on the topic.

0 Likes