How to config G1100 for Actiontec ECB6250

[TechDH]

See attached ECB6250 Moca setup page. The default has all three checked. 

The other is the G1100 connection stats. Device 1 is the ECB6250 and Device 2 is the WCB6200Q.

Sorry, I tried to upload but the popup box only has text fields for name and description and proportion but nothing else to let me select a local file to upload. I'm using Chrome.

[Cang_Household]

Once you clicked the Camera (on computer) or Photo (on phone) icon, this window should pop up. Are you using a photo or a computer?

[TechDH]

Mine does not look anything like that. There is no  upload in the middle. I get a form with fields like description, source, and proportions  but no upload.

[Cang_Household]

I am seeing something strange here. WCB6200Q can talk with ECB6250 (what a miracle🎉), but here is the problem: ECB6250 talks with WCB6200Q at bonded MoCA 2.0 speed (~1200 PHY), but the reverse is not true, WCB6200Q only talks with ECB6250 at unbonded MoCA 2.0 speed (~650 PHY). I hope ECB6250's status detection mechanism is at fault here. It may be pulling second hand PHY data from G1100 because its the network coordinator. Since G1100 connects at unbonded 2.0 speed, so ECB6250 copies this unbonded speed.

Can you test the connection speed between WCB6200Q and ECB6250 manually using iperf3 in both directions? I know you worked in the IT field for over two decades. This should not be hard for you, right?