- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi.
I currently have Verizon FiOS Internet w/ a Westell UltraLine Series 3 9100EM FiOS modem.
For [P2P-sharing], I need to forward a port. Port 52883 to be exact.
But the firmware's port forwarding section is pretty complicated. Because when I used to have a Westell 6100F, all I had to do was specify the IP address of the network device you'd be port forwarding, and the port you wanted to forward for that device.
On this one, I have:
[check] Specify Public IP Address
..........[IP Address Field]
Localhost IP Address
[check] Specify Network IP Address
..........[IP Address Field]
And then I can manually specify the ports.
TCP > [Single] or [Range] > Port
UDP > [Single] or [Range] > Port
And a few other options.
I won't provide screen shots just yet. But if anyone needs a screenshot, image of the modem, or more information, I will be glad to provide those.
Thanks in advance.
-Matt
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
http://www.portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/MI-424-WRindex.htm
http://www.portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WRv2/MI-424-WRv2index.htm
#2 Which of those two guides is the closest to your router's screens?