Print server install problems.

Reply
Highlighted
Contributor
Contributor
Posts: 1
Registered: ‎07-23-2020

Print server install problems.

Message 1 of 3
(483 Views)


i recently purchased a print server IOGEAR GPSU21. Once I set up to my fios router it seems to join my network but never become active, which will not show up on network to complete the software setup. I went in and changed the ip via the router and nothing. Also once the print server is connected it makes my router kick off my pc which is wire to the router. Also it would deactivate The two IP-STB devices both 1 n 2. 
B8B773E5-FE71-41D3-83FA-550503F394BE.jpeg

2 REPLIES 2
Highlighted
Contributor
Contributor
Posts: 1
Registered: ‎10-12-2020

Re: Print server install problems.

Message 2 of 3
(143 Views)

i have the exact same problem   not sure why i can see the print server when to boot it but it disappears in seconds

Highlighted
Silver Contributor II
Silver Contributor II
Posts: 285
Registered: ‎09-06-2020

Re: Print server install problems.

Message 3 of 3
(132 Views)

Verizon ping is not that instant. You should use a nmap to scan your local area network.

 

I need more information about the printer so the forum users can help you.

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Covid19


Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.