×

Switch Account

STB compatibility with Moca 2.0 and Moca 2.0 bonded

Reply
Highlighted
Copper Contributor
Copper Contributor
Posts: 10
Registered: ‎05-01-2019

STB compatibility with Moca 2.0 and Moca 2.0 bonded

Message 1 of 4
(777 Views)

I've noticed some people have gotten WBC3000N and ECB2500 Moca devices to talk to their set top boxes. These devices are all moca 1.1 and the STB is also moca 1.1.

 

The question is, since Moca 2.0 is backwards compatible, why can't it connect to a ECB6200 which is a bonded moca 2.0 adapter? My attempts have all failed to connect to the STB showing the on demand, channel guide etc unavailable when using the ECB6200.

 

3 REPLIES 3
Highlighted
Platinum Contributor III Platinum Contributor III
Platinum Contributor III
Posts: 7,876
Registered: ‎11-04-2008

Re: STB compatibility with Moca 2.0 and Moca 2.0 bonded

Message 2 of 4
(682 Views)

What model STB are you using?

How is the STB connected?

The MOCA adapters don't talk to the STB.
They talk to your router.


If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
Highlighted
Copper Contributor
Copper Contributor
Posts: 10
Registered: ‎05-01-2019

Re: STB compatibility with Moca 2.0 and Moca 2.0 bonded

Message 3 of 4
(620 Views)

I'll have to check the model of my STB when I get home but I'm connected to the ONT through the G1100 gateway from the WAN port.  The Adapter is connected to the Lan port of the G1100 and the coax to the STBs. The STB have problems with on demand, channel guide etc when connected to adapter. No problems with those functions when connected to the G1100 moca coax instead.

 

So the question is, why? The verizon moca wan is at 1000 mhz and the moca lan is at 1150 mhz. The adapter can easily cover those frequencies... Is it a setup issue with the moca or the STB?

Highlighted
Gold Contributor VII Gold Contributor VII
Gold Contributor VII
Posts: 1,854
Registered: ‎06-24-2018

Re: STB compatibility with Moca 2.0 and Moca 2.0 bonded

Message 4 of 4
(603 Views)

@MoonDragn wrote:

I'll have to check the model of my STB when I get home but I'm connected to the ONT through the G1100 gateway from the WAN port.  The Adapter is connected to the Lan port of the G1100 and the coax to the STBs. The STB have problems with on demand, channel guide etc when connected to adapter. No problems with those functions when connected to the G1100 moca coax instead.

 

So the question is, why? The verizon moca wan is at 1000 mhz and the moca lan is at 1150 mhz. The adapter can easily cover those frequencies... Is it a setup issue with the moca or the STB?


Are you trying to get rid of the G1100? If you have a G1100 why are you using a MoCA adapter?

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Covid19


Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.