- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I just installed another router after one died, and asked the technical support guy that helped me get another one ordered if I could buy a backup router to plug in so I'm not without the Internet while I wait for a replacement router. He said I could.
I've been looking around and have seen that there are various revisions. I currently have a Rev C, but have seen Rev D & Rev E for sale.
I have two questions:
1) Will the other rev's work OK if I buy one of those?
2) Does Verizon match the MAC address of my unit to my account and allow only that MAC address to connect to their service, or can I plug in any Actiontec MI424WR and it will work?
Solved! Go to Correct Answer
Correct answers
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Not tried it myself but from what I've read on this forum you are not even tied to using an Actiontec router however if you are running MOCA you are kind of limited to getting one that will accept coax unless you ask Verizon to enable your internet for ethernet connection.
Of course if you are using FiOS TV you will lose the guide if you do not connect via MOCA.
This link may be of interest to you
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I now have two routers, and I'm able to swap back and forth between them in a moments notice due to one thing: I set the MAC address the same for both of them!
Thanks for the tips, everyone. You helped me figure out how to get my backup router able to swap in and function in a couple minutes with no more effort than swapping cables!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Just curious, but how do you change a MAC address on a piece of equipment? I thought it was chiseled in granite somehow. Or is this something proprietary with Actiontec?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Look under the Advanced menu and there is a selection for changing the MAC address. It's as easy as typing it in.
Keep in mind that when you reset the router via the button in back, it reverts to it's original MAC address.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Pretty cool tip, Paul. Thanks.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can do it with any network device. Somwhere in the advanced setup you will find the window that allows you to define a specific MAC address to override the hardware manufacturer's defined one.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Preciate the help, guys. Thanks. Learn something new every day...