Accessibility Resource Center Skip to main content
Get it fast with In-store & curbside pickup or same day delivery.

Switching FIOS from Coax to Ethernet

SOLVED
Reply
Doc59
Contributor
Contributor
Posts: 1
Registered: ‎06-12-2020

Switching FIOS from Coax to Ethernet

Message 1 of 2
(2,354 Views)

We have an early FIOS installation that is Coax.  We have TV, Internet and Phone.  I want to move to Gigabit internet.  I saw that you can run an ethernet cable from the ONT to the router, and disconnect the coax cable.  However, all of our set top boxes etc are connected via coax...  My question is how do you move to ethernet to take advantage of higher internet bandwidth and maintain the TV and Phone services?

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
gs0b
Gold Contributor VII Gold Contributor VII
Gold Contributor VII
Posts: 1,827
Registered: ‎12-02-2012

Re: Switching FIOS from Coax to Ethernet

Message 2 of 2
(2,342 Views)

The connections to set-top-boxes and phone do not change.  Run an Ethernet line from the ONT to the router's WAN port.  Do not change any other connections. Do not disconnect coax from the router, it is needed for the set-top boxes.

 

Once this is done, contact Verizon and ask them to switch the WAN port on the ONT from coax to Ethernet.  It takes just a few minutes once you start talking to them.

 

Note that if you've had FiOS for quite some time, you might have an older model ONT that needs to be replaced in order to get gigabit service.  Still do the Ethernet switch, as that is needed regardless of ONT model.

 

View solution in original post

1 REPLY 1
gs0b
Gold Contributor VII Gold Contributor VII
Gold Contributor VII
Posts: 1,827
Registered: ‎12-02-2012

Re: Switching FIOS from Coax to Ethernet

Message 2 of 2
(2,343 Views)

The connections to set-top-boxes and phone do not change.  Run an Ethernet line from the ONT to the router's WAN port.  Do not change any other connections. Do not disconnect coax from the router, it is needed for the set-top boxes.

 

Once this is done, contact Verizon and ask them to switch the WAN port on the ONT from coax to Ethernet.  It takes just a few minutes once you start talking to them.

 

Note that if you've had FiOS for quite some time, you might have an older model ONT that needs to be replaced in order to get gigabit service.  Still do the Ethernet switch, as that is needed regardless of ONT model.

 

View solution in original post

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.