Accessibility Resource Center Skip to main content
Get it fast with In-store & curbside pickup or same day delivery.

Switching from Coax to Ethernet

Reply
Papaauge73
Contributor
Contributor
Posts: 2
Registered: ‎08-21-2017

Switching from Coax to Ethernet

Message 1 of 3
(9,568 Views)

I want to switch from Coax to ethernet so I could use google wifi. The problem I am running into is that the ONT is located outside and it is going to be very difficult to run a new ethernet cable from the outside into the house where the current router is located. I noticed there are 3 cables in the ONT that come into the house (One Coax and two ethernet cables). Inside the ONT box, the blue ethernet cable has two wires connecting to a phoneline terminal (blue and blue/white strip) and the same blue cable has two wires connecting to another terminal (brown and brown/white strip) inside the box. See attached photos. Also within the box is the green ethernet cable that connects to another terminal see attached photos.

Now, inside the house the blue ethernet cable wires blue and blue/white strip connects to a phone terminal and the brown and brown/white strip connects to the Battery Backup. See attached photos. However, the green cable connects directly to the battery backup. 

I suspect the blue ethernet cable is a phoneline but since I do not have a phone service can I disconnect the blue ethernet cable and use it as my new ethernet cable for my coax switch? Also, I think the green ethernet cable provides power to the ONT so that is untouchable.  I know this is confusing but I really need help. 

Thanks in advance!

Inside the houseInside the houseOutside ONTOutside ONTInsideInside

2 REPLIES 2
jonjones
Platinum Contributor II
Platinum Contributor II
Posts: 5,252
Registered: ‎10-18-2016

Re: Switching from Coax to Ethernet

Message 2 of 3
(9,549 Views)

This is not as difficult as it looks.

First Verizon will have to switch you from coaxial to ethernet. after that is done the installer will run a good length of cat5e ethernet from your ONT to the place the verizon router is situated. Verizon will handle all of this. No need for you to worry about it. 

 

If you are just swapping out to ethernet and not gettiing a speed upgrade then fios may charge you for a premise visit. However if they do come out to switch you over you will know in advance of any charges.

 

Don't mess with any cabling in the ONT it is not your property and it belongs to Verizon. They will charge you for any damages to their equiptment.

 

Good Luck

 

 

Papaauge73
Contributor
Contributor
Posts: 2
Registered: ‎08-21-2017

Re: Switching from Coax to Ethernet

Message 3 of 3
(9,534 Views)

Got it. I thought I could use the redundant cat 5e cable instead go through the painful process of getting a new cable installed. Thanks jonjones. I appreciate your quick response. 

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.