×

Switch Account

Trying to prewire new construction for easy Verizon Hookup

Trying to prewire new construction for easy Verizon Hookup

SOLVED
Reply
Contributor LM3
Contributor
Posts: 1
Registered: ‎08-19-2019
Message 1 of 4
(334 Views)

Trying to prewire an apartment building prior for Verizon hookup when tenants ulitmately move-in. Walls are open and would like to wire everything now so it's neat, orderly and aren't holes in the exterior of the building where we wouldn't like.

 

Tried talking to a salesperson on the phone, they were minimal help. Wondering what our electrician needs to provide in each apartment in order to allow easy/minimal hookup when Verizon is ordered. 

3 REPLIES 3
MVP Edg1 MVP
MVP
Posts: 1,081
Registered: ‎06-24-2018
Message 2 of 4
(318 Views)

Definitely run homeruns of rg6 and cat 6 to a jack in each room. Run them back to a low voltage panel to where Verizon can place an ONT and connect to the wiring. 

What kind building is it? How many units? Is the Verizon terminals on a pole or in the building?You can run conduit from the basement or utility area to each apartment so VZ can run fiber to the unit. You could also have all the ONTs placed in a basement or utility area. Then run 2 cat 6s and 1 coax feeds to to the low voltages panel in each in each apartment. 

Basically inside the apartment have a cat6 and coax running to a low voltage panel. That panel will also need a conduit to wherever VZ brings in the fiber to the building. Or run 2 cat6s and 1 rg6 to wherever VZ is bringing the fiber. Sorry it’s a lot of information, but just post back if any other questions. 

MVP Edg1 MVP
MVP
Posts: 1,081
Registered: ‎06-24-2018
Message 3 of 4
(314 Views)

Low voltage panel like this would be good. 


1BB1F1B4-7F8C-495F-A294-0E34490901E5.jpeg
Highlighted
Platinum Contributor II Platinum Contributor II
Platinum Contributor II
Posts: 7,517
Registered: ‎11-04-2008
Message 4 of 4
(291 Views)

May also be worthwhile to run an empty conduit from a common utility area to a closet orother area with nearby electrical outlet in case Verizon wants to run an ONT to each unit.

I would also look at layout of each apartment and think of the best place you would want a coax outlet in the living area as well as bedrooms or den.

Newer STBs can do wireless so may not be needed, but pretty cheap insurance rather than having tenants trying run it themselves.


If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.



Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.