Accessibility Resource Center Skip to main content
Get it fast with In-Store & Curbside Pickup or same day delivery.

Using 2 Actiontec routers

Posts: 1
Registered: ‎02-07-2013

Using 2 Actiontec routers

Message 1 of 2

I have 2 actiontec MI424-WR routers.  The previous tenant in my apartment left his here, and when I signed up for FIOS they shipped me a router with the cable box and such.


My place is small but for some reason the wireless connectivity in my bedroom is pretty bad.  Maybe it's the concrete walls, maybe there's a channel conflict, I dunno.


Either way I figure I have the second router, maybe I can just hook it up to the first (wired) and use it as an access point in my bedroom.  Is this feasbile?  I'm guessing I'd have to disable DHCP somehow. 

Platinum Contributor III
Platinum Contributor III
Posts: 5,881
Registered: ‎07-22-2009

Re: Using 2 Actiontec routers

Message 2 of 2

You are going in the right direction, but if you have a working FiOS TV outlet in that area where you want it, then you should try this method. 



Configure MI424WR as a LAN MoCA Bridge - A


Basically you take it to that room, get a two way tv splitter (5-1000mhz) and then hook the wall coax cable into this splitter.  The splitter will have two outs.  one cable will get connected between the new router, and a 2nd cable will get connected to your set top box. 


Use the configuration settings as described.


Then you can plug straight into the router for the best connectivity (always recommended) or use the wireless from that router in that room. 

How-To Videos
The following videos were produced by users like you!
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Browse Categories

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title