05-08-2019 07:21 PM - edited 05-08-2019 07:22 PM
forwarding_rules = "forwarding-rules.txt"(using double-quotes not single quotes) to dnscrypt-proxy.toml right after the line cache_neg_ttl = 60
fios-router.home 192.168.1.1Is that correct?
05-16-2019 11:50 PM - edited 05-16-2019 11:55 PM
Update - trying to follow the wiki link about Forwarding -
(1) I put forwarding-rules.txt into the same folder as dnscrypt-proxy.toml.
(2) I added the lineforwarding_rules = "forwarding-rules.txt"(using double-quotes not single quotes) to dnscrypt-proxy.toml right after the line cache_neg_ttl = 60
(3) The only line I put in forwarding-rules.txt isfios-router.home 192.168.1.1Is that correct?
RESULTS - The above didn't work, and on reboots I continue to get the Event 1014 Warning "Name resolution for the name _ldap._tcp.dc._msdcs.fios-router.home. timed out after none of the configured DNS servers responded."
‘fios-router.home’ is a DNS Suffix. This router does not handle LDAP related actions. If your system is set up to access a domain controller or more simply have your system set up to use Active Directory you might get those errors.
It has no impact on your ability to access the internet.
05-22-2019 12:56 PM
Seeker - Thanks for your post, and your post is infomrative, but it is not a solution.
I think this new issue - didn't have it before - should be truly fixed before we acknolwedge a solution.
05-22-2019 03:22 PM - edited 05-22-2019 03:46 PM
When you connect a computer to your G1100 router using DHCP a dns record is created in the router's DNS that allows you to gain access to a device using a name instead of the device's local IP address. It is formated as <hostname>.fios-router.home.
Aka if you have a computer whose's hostname is set to DESKTOP-123456G, the router will register a DNS record named desktop-123456g.fios-router.home. This is a feature provided as a convience.
By providing fios-router.home as a dns suffix this allow you the ability to connect to the example host name above by only needing to type in desktop-123456g to access a resource provided by that device, your operating system will automatically append fios-router.home to the end if only desktop-123456g does not exist, but you will not see it.
In your case the real issue is that your computer is trying and failed to access a Domain COntroller on your network. If you use a Domain Controller, this error is relevant to you because this error means your Domain Controller is offline or inaccessible to this computer.
Domain Controllers are used when you have Active Directory set up on your network.
If you are using Active Directory, it is either not configured properly or unavailable resulting in the error you are seeing.
By setting your forwarding rules as
You are telling your computer that the Domain Controller on on the router. This would not be correct ad the router does not handle any kind of active directory and is instead handled (typically) by a computer running a variant of Windows Server that has Active Directory Services enabled and is properly configured.
05-29-2019 05:15 PM
Seeker - I shall look at your post above more carefully this weekend. (I did not get an email from this Forum that you had posted last week!!)
But, on fast read, my home PC has always been Workgroup, never Domain.
And "_ldap._tcp.dc._msdcs" is not familiar to me - it's not the name of my PC and there is no User name like this.
You should also know that I also get the same Warning for "Name resolution for the name wpad timed out after none of the configured DNS servers responded."
05-29-2019 06:31 PM
Here is a breakdown if the `ldap._tcp.dc._msdcs` string.
It's a dns entry used to try and automatically configure a computer to a domain controller without having to manually configure it.
tcp because LDAP runs over TCP/IP
DC = Domain Controller
MSDCS = Microsoft Domain Controller Services
Tring to connect to a Lightweight Directory Access Protocol service using TCP.
This is a Domain Controller, and should be configured using the Microsoft Domain Controller Services.
05-30-2019 06:44 AM - edited 05-30-2019 06:45 AM
Seeker - thanks for your fast reply and continued interest. I am learning from your posts.
However, there is an anomaly. This PC dual-boots this Win 10 Pro 64-bit (version 1803) and Win 7 Pro 64-bit. The Win 7 has the same dnscrypt-proxy setup.
When I boot into the Win 7, these Warnings do NOT appear.
What's the difference?
Also - and again I have not yet studied your post three above - what should I do specifically to fix the issue on my Win 10?
By the way, I very much want to stick with dnscrypt-proxy. For example, I get good security scores on https://www.cloudflare.com/ssl/encrypted-sni/