Accessibility Resource Center Skip to main content
Get it fast with In-Store & Curbside Pickup or same day delivery.

XBox Live Hijacking My Router

Reply
barkleygracie
Contributor
Contributor
Posts: 1
Registered: ‎02-14-2010

XBox Live Hijacking My Router

Message 1 of 4
(6,868 Views)

I use a computer connected by Ethernet to my Verizon FIOS Actiontec MI424WR router.  Ever since my son got XBox live, whenever he plays the game (he connects wirelessly to the router from the basement), it knocks out the internet connection on my computer and others in the house.  Other wireless laptops in the house get an "IP conflict" error message when they try to connect wirelessly while he is on the XBox.  Is there some setting or port I need to open on the router to avoid this problem?

Thanks,

3 REPLIES 3
dslr595148
Trivia Champ
Trivia Champ
Posts: 6,062
Registered: ‎09-24-2008

Re: XBox Live Hijacking My Router

Message 2 of 4
(6,845 Views)

#1 It is nice that he setup a Static IP on his Xbox, but it seems he did it wrong.

 

http://www.portforward.com/networking/staticip-xbox360.htm

 

#2 In the router go to Advanced > IP Address Distribution.

 

#3 What is the DHCP Range of the router?

If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.


 

Hubrisnxs
Platinum Contributor III
Platinum Contributor III
Posts: 5,881
Registered: ‎07-22-2009

Re: XBox Live Hijacking My Router

Message 3 of 4
(6,754 Views)

he probably just needs to change the ip address   he set it to one that is common, and there is a conflict.

Arthurlw
Bronze Contributor I
Bronze Contributor I
Posts: 58
Registered: ‎01-11-2010

Re: XBox Live Hijacking My Router

Message 4 of 4
(6,724 Views)

My guess is that if he does not keep it running all the time, the Actiontec drops the XBox and assigns its IP to some other device that connects later after it gets shut off.  Then, when it gets turned back on and some other device already has been assigned its IP a fight ensues.  I have had things like a VOiP adapter and a downstream router that I assigned static addresses to with no problems, but they were online the whole time, so the Actiontec had no problems assigning higher-numbered dynamic addresses to the different computers as they came on line later.

 

Since this is (I assume) an on-again-off-again thing — and you just really need the XBox to have its own static address, you could assign it a number higher than the number of devices you will be connecting.  In other words, if the highest IP in your Actiontec control panel (w/o the XBox and with all other devices connected and running) is 192.168.1.5, just make the XBox 192.168.1.6 (or higher) and you should be OK.     

__________________________________________________
It's ok to try to reinvent the wheel, but just make sure it's round.
How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title