An Accepted Solution is available for this post.
actiontec mi424-wr rev. F jtag header
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
iam trying to find out the jtag header pinout for the new mi424 rev F router I have found several post online about older rev but none on the newer rev F. Below is the info about the rev F board.
There are three header connectors on the board:
one labeled J7 that is populated with 6 pins
one labeled J6 that is unpopulated 6 pin
one labeled J2 this is unpopulated 14 pin
any ideas which is jtag and if so what the pin out is all i really need is to know correct location I can figure pinout.
any help would be great thanks
Jason