Accessibility Resource Center Skip to main content
Get it fast with In-Store & Curbside Pickup or same day delivery.

port not opening or forwarding properly

Reply
sleepsong
Contributor
Contributor
Posts: 2
Registered: ‎07-09-2016

port not opening or forwarding properly

Message 1 of 7
(1,147 Views)

Right now if I go to 192,168.1.9 It shows a webcam. . Now, I want this to be visable from outside the network. In my router I have this forwarding setup:

ver-for.png

I would think with that in place, I can go to <router public IP>:50000 and it should show the webcam. It does not. Also, if I telnet to the router's IP on that port, it does not show as open. I have even tried this with other ports. What am I doing wrong?

6 REPLIES 6
viafax999
Gold Contributor VII Gold Contributor VII
Gold Contributor VII
Posts: 2,159
Registered: ‎11-10-2009

Re: port not opening or forwarding properly

Message 2 of 7
(1,125 Views)

@sleepsong wrote:

Right now if I go to 192,168.1.9 It shows a webcam. . Now, I want this to be visable from outside the network. In my router I have this forwarding setup:

 

I would think with that in place, I can go to <router public IP>:50000 and it should show the webcam. It does not. Also, if I telnet to the router's IP on that port, it does not show as open. I have even tried this with other ports. What am I doing wrong?




Your picture isn't showing yet however what it should say in port forwarding rules is

 

192.168.1.9    Destination ports 5000     all broadband devices    active

                          TCP any -> 5000

 

 

Capricorn1
Silver Contributor IV Silver Contributor IV
Silver Contributor IV
Posts: 259
Registered: ‎06-30-2012

Re: port not opening or forwarding properly

Message 3 of 7
(1,075 Views)

A couple things come to mind you might try. I'm not sure if Verizon will allow incoming connections to port 80 (or 443, 25, 21) on residential accounts. Maybe you could try 8880 or something similar. Also, for something like a camera, you might want the rule for both TCP and UDP rather than just TCP.

[Be nice! We are mostly fellow Verizon customers.
My setup: 75/75 Mbps; Linux router (2x 1Gbps ports) + iptables; Netgear Orbi x 2
viafax999
Gold Contributor VII Gold Contributor VII
Gold Contributor VII
Posts: 2,159
Registered: ‎11-10-2009

Re: port not opening or forwarding properly

Message 4 of 7
(1,032 Views)

@sleepsong wrote:

Right now if I go to 192,168.1.9 It shows a webcam. . Now, I want this to be visable from outside the network. In my router I have this forwarding setup:

ver-for.png

I would think with that in place, I can go to <router public IP>:50000 and it should show the webcam. It does not. Also, if I telnet to the router's IP on that port, it does not show as open. I have even tried this with other ports. What am I doing wrong?


Your PF rule is reversed, should say

 

192.168.1.9:50000   Destination port 80   TCP Any -> 80

 

 

sleepsong
Contributor
Contributor
Posts: 2
Registered: ‎07-09-2016

Re: port not opening or forwarding properly

Message 5 of 7
(994 Views)

@viafax999 wrote:

@sleepsong wrote:

Right now if I go to 192,168.1.9 It shows a webcam. . Now, I want this to be visable from outside the network. In my router I have this forwarding setup:

ver-for.png

I would think with that in place, I can go to <router public IP>:50000 and it should show the webcam. It does not. Also, if I telnet to the router's IP on that port, it does not show as open. I have even tried this with other ports. What am I doing wrong?


Your PF rule is reversed, should say

 

192.168.1.9:50000   Destination port 80   TCP Any -> 80

 

 


Are you sure? To be clear... 192.168.1.9:80 is working the way it should (from inside the network). So I want to be outside of the network, go to <public-ip>:50000 and it forwards to  192.168.1.9:80 so I could see the webcam there outside of house.

viafax999
Gold Contributor VII Gold Contributor VII
Gold Contributor VII
Posts: 2,159
Registered: ‎11-10-2009

Re: port not opening or forwarding properly

Message 6 of 7
(953 Views)

@sleepsong wrote:

 

 


Are you sure? To be clear... 192.168.1.9:80 is working the way it should (from inside the network). So I want to be outside of the network, go to <public-ip>:50000 and it forwards to  192.168.1.9:80 so I could see the webcam there outside of house.


I'm sorry, must of been asleep when I I wrote that.  YES your rule is correct

 

Have you tried taking port 50000 out of the equation and just open port 80 instead?  

Which model router are you using?

 

lasagna
Gold Contributor VII Gold Contributor VII
Gold Contributor VII
Posts: 2,002
Registered: ‎05-27-2010

Re: port not opening or forwarding properly

Message 7 of 7
(933 Views)

Looks right ot me.   Silly question ... have you checked to insure that the webcam has a default route pointed at the router setup on it?  Should be 192.168.1.1 unless you changed your router's address.   If not, the traffic would be reach the camera but it wouldn't know how to get back.

 

Without the route, it would work on the local network, but not outside of it.

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title