2 DVRs but can only program one on the web

Posts: 1
Registered: ‎05-03-2010

2 DVRs but can only program one on the web

Message 1 of 2

I have 5 older TVs with 3 regular STBs and 2 DVRs.  Only one DVR can be accessed on the web.  I can see all the boxes online but can only access the hard drive to program one of them.  Not one at a time - I can only access one of the DVR boxes.  Shouldn't I be able to access each DVR, or am I restricted to only one.If I am restricted, how can I fix it so I can control the other DVR instead?

Employee Emeritus Employee Emeritus
Employee Emeritus
Posts: 135
Registered: ‎01-23-2010

Re: 2 DVRs but can only program one on the web

Message 2 of 2

Hi Bermo, you should be able to access both dvr's from the web. If one isn't allowing it, try rebooting that stb (unplug/replug), then go back into the site and it should be available for access. If that doesn't help, go into the stb menu to help then self diagnostics. It will show there whether that stb has an ip address or not. If it doesn't you can reseat the coax to that stb then reboot again. Let me know if this helps.



Verizon Telecom
Fiber Solution Center

Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

How-To Videos
The following videos were produced by users like you!
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.

Browse Categories

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.