06-20-2015 05:16 PM
I paid extra for the capability to record 12 channels. I was provided 2 VMS1100 and 4 IPC 1100. When I had 2 of the older QIP 7232, I could record from any STP or QIP to either of the QIP DVRs. With my Quantum set up, the two VMS DVRs seem to be completely independent of each other for recording. If I am on 1 of the VMS1100 and have 6 recordings going, I am unable to record a 7th. I must get up and go upstairs to the other VMS1100 to record the 7th channel. Is this the way it should be? I expected that I would be prompted to select which VMS I wanted a new recording to go on, but this is not the case.
I would note that I can watch recordings from either VMS from any of the devices.
Let me know if this is the correct functionality I should expect.
06-22-2015 10:08 AM
Its not so much a step backwards as it is a different archtecture.
IPCs have to slave to a VMS for functionality.
So what you really have is a remote tuner. So when you program to record, the tuner choses the box it is running on.
Coordinating between VMSs is a bit complicated as you have to keep track of what is being recorded when on each box.
You used to only have 4 tuners for recording before, now you have 12. Do you often need more than 4 for recording?
If you are running out of tuners on one VMS, try moving one or two IPCs to the other VMS.
I believe you can see recordings from either VMS when bring up DVR list.