×

Switch Account

Auto select of HD channel

Auto select of HD channel

Reply
Highlighted
Copper Contributor
Copper Contributor
Posts: 8
Registered: ‎09-20-2010
Message 1 of 2
(1,610 Views)

As a former cablevision customer and now a generally happy FIOS customer, there is one thing I miss. On a cablevision HD STB regardless of the chnnel you selected you would always get the HD signal. For instance if I selected channel 4 (which is a non-HD signal) I would still get the HD version of that channel. I havn't found anyhting like this on FIOS.

1 REPLY 1
Gold Contributor V
Gold Contributor V
Posts: 1,692
Registered: ‎05-17-2009
Message 2 of 2
(1,605 Views)

Verizon doenst have an option like that.

 

Verizon actually seperates the channels

 

For example   TNT

 

channel     51     is TNT SD

channel    551     is TNT HD

 

basically all channels above 500 are the HD and all channels below are SD.

 

I think the reason they do this is for the MRDVR. With the MRDVR, if you want to be able to share the programming from HD DVR to the SD STB's, the programming must be recorded in SD not HD. So if the HD DVR went to the HD channel by default you would never be able to share the programs. So you must have a way of selecting either HD or SD. I think this is likely the easiest solution they found. Just means that for HD boxes, you stay in the channels 500+ and on SD systems you stay in the channels below 500




====================================================================================

Error exists between keyboard and chair.
How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Covid19


Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.