- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I just got FiOS installed today and as I was going through the menu, I noticed that for the video resolution, you are forced to pick a format. Is there a way to set it up so that the STB automatically picks the resolution that the broadcaster has chosen? I don't want to watch everything in 1080i or 720p. I'd like to watch it as the channel has chosen to send the signal
Solved! Go to Correct Answer
Correct answers
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unfortunately no.
My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
__________________________________
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unfortunately no.
My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
__________________________________
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
how do you switch between the two?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@TwinkieTheKid wrote:how do you switch between the two?
On the TV (using the remote):
Menu ==> Settings ==> Video Settings ==> Video Format
The SD Override setting is also in the Video Settings folder.
__________________________________
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
On my 6200 (w/ 1.7), I can change the SD override to whatever I want, but it always seems to revert back to 480i whenever I turn off and turn back on my STB. Any way to stop that? It also reverts back my video setting to 720p (HDMI to 720p TV) even if I set it to 1080i. My 7216, which is hooked up w/ HDMI to another 720p TV, seems to want to stay on 1080i. Weird.