Accessibility Resource Center Skip to main content
Get it fast with In-Store & Curbside Pickup or same day delivery.

Changed splitter now not getting all channels on digital adapter

SOLVED
Reply
cagill14
Copper Contributor
Copper Contributor
Posts: 5
Registered: ‎03-09-2021

Changed splitter now not getting all channels on digital adapter

Message 1 of 2
(410 Views)

I have a TV connected to Fios via digital adapter.  The adapter is connected via coax cable to a splitter.  I switched out a 2 way Antronix splitter to a Verizon MoCa 2.5 splitter and now all Fios channels are not available through the digital adapter.  All the channels were available when the adapter was connected to the Antronix splitter.  Any reason why this occurred?

1 ACCEPTED SOLUTION

Accepted Solutions
clem53
Gold Contributor III Gold Contributor III
Gold Contributor III
Posts: 1,506
Registered: ‎12-06-2010

Re: Changed splitter now not getting all channels on digital adapter

Message 2 of 2
(378 Views)

@cagill14 wrote:

I have a TV connected to Fios via digital adapter.  The adapter is connected via coax cable to a splitter.  I switched out a 2 way Antronix splitter to a Verizon MoCa 2.5 splitter and now all Fios channels are not available through the digital adapter.  All the channels were available when the adapter was connected to the Antronix splitter.  Any reason why this occurred?


Check all the connections and make sure there aren't any stray shield "hairs" in the connections. You may also have gorren a bad splitter. Is the new splitter a two way like the old or does it have more outputs? If it has more, the signal drops quite a bit for every split, and may be causing the issue.

View solution in original post

1 REPLY 1
clem53
Gold Contributor III Gold Contributor III
Gold Contributor III
Posts: 1,506
Registered: ‎12-06-2010

Re: Changed splitter now not getting all channels on digital adapter

Message 2 of 2
(379 Views)

@cagill14 wrote:

I have a TV connected to Fios via digital adapter.  The adapter is connected via coax cable to a splitter.  I switched out a 2 way Antronix splitter to a Verizon MoCa 2.5 splitter and now all Fios channels are not available through the digital adapter.  All the channels were available when the adapter was connected to the Antronix splitter.  Any reason why this occurred?


Check all the connections and make sure there aren't any stray shield "hairs" in the connections. You may also have gorren a bad splitter. Is the new splitter a two way like the old or does it have more outputs? If it has more, the signal drops quite a bit for every split, and may be causing the issue.

View solution in original post

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.