An Accepted Solution is available for this post.
Jump to solution.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Is it possible to hook up a component cable from the 6416 DVR to a non-HDTV that has
a component input on Video Input 1? My DVD works fine with a component cable to the TV
through my A/V unit. If I connect from the 6416 with a component cable I get diagonal
lines as picture output. Sound is fine using optical cable from DVR to A/V.
Solved! Go to Correct Answer
1 Solution
Correct answers
An Accepted Solution is available for this post.
Jump to solution.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for your reply. Got me on the right track. DVR was set to 480p. Changed
to 480i and now I have very good picture for a 480 scan TV. All is well for now.
2 Replies
An Accepted Solution is available for this post.
Jump to solution.
Re: Component TV Wiring
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
When you use the DVR with composite or S-Video it uses the default SD resolution. But when you use the component output it is probably a resolution your TV does not support. Go into the DVR settings and set the output for a resolution your TV supports. You may need to use composite cable to do this so you can see the screen.
An Accepted Solution is available for this post.
Jump to solution.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for your reply. Got me on the right track. DVR was set to 480p. Changed
to 480i and now I have very good picture for a 480 scan TV. All is well for now.