DVR program stop/start simultaneously

Bronze Contributor II
Bronze Contributor II
Posts: 79
Registered: ‎06-02-2009

DVR program stop/start simultaneously

Message 1 of 2

I've noticed that if you're recording 2 back-to-back programs on the same channel, and you watch it live as it's being recorded, it always drops out at the moment that one program ends and the other program begins. Do you know if there is a way that this can be prevented?

Employee Emeritus Employee Emeritus
Employee Emeritus
Posts: 225
Registered: ‎01-25-2010

Re: DVR program stop/start simultaneously

Message 2 of 2

Hey what your experiencing is normal the delay you get is the STB processing the command to record the program to the hard drive of the STB.  The only solution is to end the first 1 min early and start the second recording on time because when you set shows to record back 2 back the show ends and starts at the same time which give you the delay. 

Verizon Telecom
Fiber Solution Center

Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

How-To Videos
The following videos were produced by users like you!
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.

Browse Categories

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.