DVR program stop/start simultaneously
ssetta
Contributor - Level 1

I've noticed that if you're recording 2 back-to-back programs on the same channel, and you watch it live as it's being recorded, it always drops out at the moment that one program ends and the other program begins. Do you know if there is a way that this can be prevented?

0 Likes
Re: DVR program stop/start simultaneously
VZ_Ron
Contributor - Level 2

Hey what your experiencing is normal the delay you get is the STB processing the command to record the program to the hard drive of the STB.  The only solution is to end the first 1 min early and start the second recording on time because when you set shows to record back 2 back the show ends and starts at the same time which give you the delay. 

0 Likes