DVR thinks it's out of space
Geo25
Enthusiast - Level 3

My DVR recently informed me that it was out of space and was going to stop recording. It stopped recording the show and when I  looked at the DVR usage it was only half full since I don't do very much recording on that DVR. I went to the channel that had stopped recording and pressed record and the DVR started recording normally again. This is the first time I ever noticed this happen.

Is this a known problem. Any solutions?

0 Likes
Re: DVR thinks it's out of space
MikeT
Contributor - Level 1

You need to do a cold reboot.  Unplug the DVR from the wall electrical outlet, wait 30 seconds, plug it back in.  DVR space should be correct.

Mike T.

Re: DVR thinks it's out of space
tns
Master - Level 2

If a reboot isn't enough, they are some special resets you can do.

0 Likes