×

Switch Account

Ethernet port on QIP7100 2

Ethernet port on QIP7100 2

SOLVED
Reply
Highlighted
Contributor
Contributor
Posts: 1
Registered: ‎11-10-2013

Ethernet port on QIP7100 2

Message 1 of 2
(2,950 Views)

There's an Ethernet port on the QIP7100 2 STB (the manual states that it's 10/100).  Does it have any use?  Specifically, can it be used instead of the coax connection?

 

Thanks,

Willie

1 REPLY 1
Highlighted
Platinum Contributor III Platinum Contributor III
Platinum Contributor III
Posts: 4,437
Registered: ‎12-16-2012

Re: Ethernet port on QIP7100 2

Message 2 of 2
(2,944 Views)

Its there because Motorola markets to other than Verizon.  But Verizon does not use it or activate it.  Must be COAX and MOCA internet connection. 

 

The same does not apply to the routers, most/all of which have a wan Ethernet and 4 regular Ethernet connections.  The 4 regular Ethernet connection can be used.  The wan connection can be connected by Ethernet to the ONT and used, but that does require you to call and ask for it to be activated.  Note that those with FIOS speeds above 100 are connected that way.  If using the wan Ethernet and you have FIOS TV both coax and wan connection remain connected to the ONT. 

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Covid19


Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.