How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44
teegrooving1
Newbie

What cables do I need to connect my DVD/VCR recorder through my QIP 7100 to see on my TV? I would appreciate any assistance with this since I am a novice.

Thanks

0 Likes
1 Solution

Correct answers
Re: How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44
jmw1950
Specialist - Level 2

You cannot run ANY signal through a Set top box to a Television. The only input on the boxes that is actually functional is the coaxial cable. The only way your are going to connect your DVD player to the TV is via one of the AV inputs on the Television itself.

Hopefully your Television has at least 2 sets of AV inputs, because you are going to need them. 1 for the VCR and 1 for the DVD player.

Depending upon the TV, VCR and DVD player, the connections possible are:

1). HDMI cable from TV to DVD if the DVD player has HDMI and the TV has a 2nd HDMI input. It is very unlikely your VCR supports HDMI.

2). Component Video (RGB) plus Audio AV cables from audio and component outputs on the DVD player to a set of component and coresponding audio inputs on the Television. It is unlikely that your VCR supports component video.

3). S-VHS cable from DVD player or VCR  to S-VHS input on the TV (if there is one), and audio AV cables from the audio outputs on the DVD/VCR player to the corresponding audio input on the TV for the S-VHS cable. If S-VHS is not available, you can use composite video instead. HDMI and Component video will give you the best picture and composite video will give you the lowest quality picture, but depending upon the equipment, your VCR may not have an S-VHS output available.

View solution in original post

Re: How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44
jmw1950
Specialist - Level 2

You cannot run ANY signal through a Set top box to a Television. The only input on the boxes that is actually functional is the coaxial cable. The only way your are going to connect your DVD player to the TV is via one of the AV inputs on the Television itself.

Hopefully your Television has at least 2 sets of AV inputs, because you are going to need them. 1 for the VCR and 1 for the DVD player.

Depending upon the TV, VCR and DVD player, the connections possible are:

1). HDMI cable from TV to DVD if the DVD player has HDMI and the TV has a 2nd HDMI input. It is very unlikely your VCR supports HDMI.

2). Component Video (RGB) plus Audio AV cables from audio and component outputs on the DVD player to a set of component and coresponding audio inputs on the Television. It is unlikely that your VCR supports component video.

3). S-VHS cable from DVD player or VCR  to S-VHS input on the TV (if there is one), and audio AV cables from the audio outputs on the DVD/VCR player to the corresponding audio input on the TV for the S-VHS cable. If S-VHS is not available, you can use composite video instead. HDMI and Component video will give you the best picture and composite video will give you the lowest quality picture, but depending upon the equipment, your VCR may not have an S-VHS output available.

Re: How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44
teegrooving1
Newbie

Thanks for the advice. You were correct. I ended up purchasing a Blue ray DVD and is works perfectly.

0 Likes