- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Release 1.9, Build 12.40
I turned on the TV this morning, selected a remote-recorded program, started watching and within 3 minutes had the DVR freeze then re-boot itself.
After the box rebooted, I went to MENU to check the BUILD number. (12.40).
I noticed a "NEW" tag next to WHAT's NEW. As I scrolled past "In-Home Agent", the "NEW" tag flashed on the right next to "Caller ID TroubleShoot"
- First issue - If there is a truly "NEW" item within a sub-menu, the whole menu ladder should have “NEW” tags until you get to the NEW item.
- Under In-Home Agent->Caller ID TroubleShoot->Press OK to Launch – I did, the 60-second initializing screen appeared – 60 seconds later a popup appeared saying “Sending a caller ID to your Box” and there was an OK button, but no instruction….as in
- Should I press OK to start the sending of the CallerID to my box?
- Or just press OK to acknowledge the message?
- Or will the CallerID appear and THEN I should press OK?
So I pressed OK and a few seconds later another popup appeared asking me if the callerID appeared. When I selected NO (no CallerID appeared during any of the 3 times I ran it), nothing happened. One would think if the system says it’s going to do something, then ask me if the thing was successful – when I answer NO, the system should acknowledge its failure.
- Within the new messages, there is the description on how to turn on “TV Recommendations”. Once you navigate to the selection there are two selection:
- Turn On
- Turn Off
The first time through, either it didn’t appear, or I didn’t see the little green checkmark indicating the current setting.
My issue is that other on-off settings indicate their current status in different ways ((Favorites, for instance) – All FiOS menu options, selections, and settings should be consistent.
PJ
CISCO CHS 435HDC (2)
CISCO CHS 335HDC (1)
1.9 Build:12.40
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I thought there was a way to edit a message, but can't find it...
4/7 - UPDATE: My main DVR has re-booted itself now 4 times since receiving 12.40.
PJ
CISCO CHS 435HDC (2)
CISCO CHS 335HDC (1)
1.9 Build:12.40