Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you switch and bring your phone.

Mini Release APR-7.0 Observation

Reply
KDnVB
Nickel Contributor
Nickel Contributor
Posts: 31
Registered: ‎02-07-2020

Mini Release APR-7.0 Observation

Message 1 of 10
(1,622 Views)

Just a heads up....this morning I see the guide has been updated but more than that, my TV picture color was dull and had a halloween orange tint.  I checked the picture settings on my Sony XBR65X930e and discovered the Picture mode was now hard set to Dolby Vision.  Other custom settings had also been changed.  

9 REPLIES 9
clem53
Gold Contributor IV Gold Contributor IV
Gold Contributor IV
Posts: 1,655
Registered: ‎12-06-2010

Re: Mini Release APR-7.0 Observation

Message 2 of 10
(1,568 Views)

@KDnVB wrote:

Just a heads up....this morning I see the guide has been updated but more than that, my TV picture color was dull and had a halloween orange tint.  I checked the picture settings on my Sony XBR65X930e and discovered the Picture mode was now hard set to Dolby Vision.  Other custom settings had also been changed.  


Sounds like the old Dolby Vision glitch may be back. Can you change the settings in the box, or your TV back to normal and have it stick?

KDnVB
Nickel Contributor
Nickel Contributor
Posts: 31
Registered: ‎02-07-2020

Re: Mini Release APR-7.0 Observation

Message 3 of 10
(1,557 Views)

I disabled HDR settings in the Mini power cycled it and the picture returned to normal and the Dolby Vision pop up is gone and so is HDR.  

clem53
Gold Contributor IV Gold Contributor IV
Gold Contributor IV
Posts: 1,655
Registered: ‎12-06-2010

Re: Mini Release APR-7.0 Observation

Message 4 of 10
(1,546 Views)

@KDnVB wrote:

I disabled HDR settings in the Mini power cycled it and the picture returned to normal and the Dolby Vision pop up is gone and so is HDR.  


Great, so the Dolby Vision glitch is still fixed on this release. There was a problem earlier where you could not disable HDR on the mini. Good to see the fix is still working on 7.0. Just remember to re-enable HDR when you are watching HDR programming.

KDnVB
Nickel Contributor
Nickel Contributor
Posts: 31
Registered: ‎02-07-2020

Re: Mini Release APR-7.0 Observation

Message 5 of 10
(1,542 Views)

Had HDR enabled prior to this release and did not have the Dolby Vision issue I now have so I'd say it's a new issue. 

clem53
Gold Contributor IV Gold Contributor IV
Gold Contributor IV
Posts: 1,655
Registered: ‎12-06-2010

Re: Mini Release APR-7.0 Observation

Message 6 of 10
(1,483 Views)

@KDnVB wrote:

Had HDR enabled prior to this release and did not have the Dolby Vision issue I now have so I'd say it's a new issue. 


The original problem was the mini locked in HDR mode with no way to change it other then limiting it to HD resolutions. APR 6.9 fixed the issue by allowing HDR to be on and off. The VMS boxes never had the issue. I thought 7.0 just continued where 6.9 left off as far as the HDR issue went.

KDnVB
Nickel Contributor
Nickel Contributor
Posts: 31
Registered: ‎02-07-2020

Re: Mini Release APR-7.0 Observation

Message 7 of 10
(1,082 Views)

Newest release APR-7.5 DID NOT fix the issue created in 7.0.  Enabling HDR on STB washes out the color on my Sony 930E.  HDR is fine on all other inputs.

clem53
Gold Contributor IV Gold Contributor IV
Gold Contributor IV
Posts: 1,655
Registered: ‎12-06-2010

Re: Mini Release APR-7.0 Observation

Message 8 of 10
(1,074 Views)

@KDnVB wrote:

Newest release APR-7.5 DID NOT fix the issue created in 7.0.  Enabling HDR on STB washes out the color on my Sony 930E.  HDR is fine on all other inputs.


Problem is when you enable HDR on the Fios box it applies that colorspace to ALL programming, causing the color issue you see. You need to disable HDR on the Fios box unless the programming you are watching IS in HDR or you will have the wrong color on your TV.

KDnVB
Nickel Contributor
Nickel Contributor
Posts: 31
Registered: ‎02-07-2020

Re: Mini Release APR-7.0 Observation

Message 9 of 10
(1,028 Views)

Wasn't an issue until APR-7.0, having to manually enable/disable is illogical.  Other UHD devices having HDR enabled display fine. 

clem53
Gold Contributor IV Gold Contributor IV
Gold Contributor IV
Posts: 1,655
Registered: ‎12-06-2010

Re: Mini Release APR-7.0 Observation

Message 10 of 10
(997 Views)

@KDnVB wrote:

Wasn't an issue until APR-7.0, having to manually enable/disable is illogical.  Other UHD devices having HDR enabled display fine. 


That's because the Fios box does not auto sense the colorspace. It assumes if you have 2160 for the output resolution and have HDR as the colorspace, the program material IS HDR. That's why you have the bad color. The box sends the HDR flag to the TV once it is set to HDR. Maybe it will change in another update, but I don't know if the hardware can do it.

 

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title