Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.

New QIP6416-2 does not recieve remote commands

Reply
lotor
Copper Contributor
Copper Contributor
Posts: 7
Registered: ‎02-23-2009

Re: New QIP6416-2 does not recieve remote commands

Message 11 of 15
(8,217 Views)
I recently had the same problem it took using batteries that one would use in high-tech devices to resolve the problem.
retiredme
Silver Contributor II
Silver Contributor II
Posts: 287
Registered: ‎10-26-2008

Re: New QIP6416-2 does not recieve remote commands

Message 12 of 15
(8,213 Views)
Moffett, it's interesting that changing the contrast setting should impact the remote operation. Back when I had the Samsung model 850, I discovered a similar change from "vivid" to "standard" (or something similar - can't remember the exact term they use) produced satisfactory results as well. Seems to lend a little credence to the IR jamming theory. Good luck.
vdono69696
Contributor
Contributor
Posts: 2
Registered: ‎03-22-2009

Re: New QIP6416-2 does not recieve remote commands

Message 13 of 15
(8,051 Views)

Turn off energy managment in your tv's menu

mine works fine now since I turned off energy management

d007elton
Contributor
Contributor
Posts: 2
Registered: ‎03-22-2009

Re: New QIP6416-2 does not recieve remote commands

Message 14 of 15
(8,039 Views)
I have a phillips LCD 46".   After playing with all the picture quality settings, I was able to restore the use of the remote.  One setting on the TV was "Active Control" under picture settings.  It gave three options;On with light sensor, On without light sensor and Off.  I turned it off and resolved the issue.   Thanks
cjacobs001
Silver Contributor III
Silver Contributor III
Posts: 398
Registered: ‎10-09-2008

Re: New QIP6416-2 does not receive remote commands

Message 15 of 15
(8,028 Views)
digital breakup in the picture (pixelization) is caused by coax cable issues.  Re-seating all coax connections usually fixes this.  Sometimes a coax end, or the cable itself, may be bad and needs replacing.
cjacobs001
How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title