I have fios and I had their router, but I brought my own router.EVERYTHING works except my on demand.I called them and told them my on demand isnt working and they said because their router has a certain firmware that allows everything to work. If I use a 3rd party router or any router thats not a verizon router certain features wont work. (Like my on demand) They said that once verizon does an update, i wont be able to use dvr or on demand or even the guide So my question to you, is it possible or is there anything I can do to make it work fully (on Demand, etc…)

Sorry for the delay. So from your ONT there should be a coax going to a main splitter. Then the outs will go to the STBs and FNA. Ethernet from ONT will go to the Archer WAN port. Then one of the Archer’s LAN ports will connect to one of the four FNA ethe...

Awesome. Glad you got it working.

Bro, Ypu are the FREAKIN MANMy Girlfriend is Ecstatic If you were close, I would buy you a drink.THANKS

Any router should work fine. I use a basic unmanaged Dlink switch. You don’t necessarily need a switch. I have more than four ethernet connections which is why I have the switch. If you get the FiOS Network Adapter(FNA ECB5240M) from Verizon it is only $55. Both MoCA adapters you linked will be fine as well. You can use any size splitter. Mine is just an 8 port because I have runs from my basement to all the rooms in the house.The VMS1100 is the model of the Verizon DVR that is have. The new FiOS TV One is the VMS4100. So basically you’ll need a router, MoCA adapter, and cable splitter. The switch is only needed if you’ll have more than four ethernet connections which is the standard on most routers. What equipment do you have and what is your planned setup?

Yes. I have my own router and On Demand and Guide works fine. Setup is for ethernet >ONT > Ubiquiti Edge router > 16 port switch > MoCA adapter (ECB5240M)Setup for coax...ONT > 8 port cable splitter > 1 feed to VMS1100 and 1 feed to MoCA adapter (ECB5240M)

I had to make a new screen name, but I have the same questionSo I purchased the Fios Network Adapter.This is my set up.The coax cable from the wall I plugged into the 2 way splitter.1 end went into the Fios Network Adapter and 1 end went into the ONT box.Then I took The ethernet cable from the Fios Network Adapter and plugged that into the Archer Router...Not a verizon Router....NOWThe Internet works fine...As it did before...BUTMy On Demand and My guide, etc... is NOT working.I called verizon and asked the tech to enable my data port on my ONT.He said it was enabled already.Then he said NO ONE can use their own router with Fios.because THEIR router has a firmware that allows On demand, guide, etc...to work.EVERY video i found online about this problem is OLD...... Maybe 2 or 3yrs old and not updated. I tried to email the people who made the video and of course their account is there but not active.So am I missing something?Did I set this up wrong?Do I have the right Verizon Fios Network Adapter?This particular 1 has 1 coax input and 4 ethernet outputs.Should i get a moca adapter that has 2 coax lines? 1 for input and 1 for outputShould I just get a regular Moca Adapter?I see other people are reading this. ANY updated help is greatly appreciated.Its not fair to keep paying verizon a monthly fee to be forced to use their router.

Thanks for the quick responseI have 3 set top boxes (1 dvr and 2 regular boxes)I have a TP-Link AC1750 Smart WiFi Router - Dual Band Gigabit Wireless Internet Router (Archer A7)My set top box is Model # QIP7232/A386/014/500*******************************************************************So I am going to order the FiOS Network AdapterFNA ECB5240M from Verizon.I see it is only $55.So all I need it that Fios adaptera cable splitterand a router, then I should be good? Correct?All I need to do is put the coaxial cable in the Fios network adapter, then plug the ethernet cord from the ont into the Fios adapter, Then take the other ethernet cable and plug it into the router?Where does the splitter come in.Or did I do this wrong? lol