An Accepted Solution is available for this post.
Possible Workaround For Having To FF Show After HUB Error
vinnyv07
Contributor - Level 1
‎02-06-2009 12:55 PM

I just wanted to throw this out for some testing before I say it always works. We all know that when the HUB error comes up, the show restarts from the last time the user pressed stop or from the beginning of the show. Then we have to FF all the way through the show to the part that we were cut off. It is annoying. A couple of times, I noticed that I actually did get to start from the point that the HUB error flashed on the TV. More than a couple of times I was able to press the OK button less than a couple of seconds after the HUB message came up. I then was able to restart the show from the point where the HUB message came up...not from the beginning. If this has been mentioned before than I missed it. I am going to continue to try and press the OK button quickly after the HUB message comes up to see if it actually does give the user the option of starting the show at the point of the HUB error. If other people would like to try this or chime in....that would be great.

I posted this yesterday in the wrong forum. Sorry. 

 
0 Likes
2 Replies
An Accepted Solution is available for this post.
Re: Possible Workaround For Having To FF Show After HUB Error
TimSykes
Specialist - Level 2
‎02-06-2009 12:59 PM
I always press of, and I think that's done it for me one time. So it may work, but its not a consistent thing. 
0 Likes
An Accepted Solution is available for this post.
Re: Possible Workaround For Having To FF Show After HUB Error
vinnyv07
Contributor - Level 1
‎02-08-2009 05:07 PM
Well, I have tested pressing the ok button within three seconds of seeing the HUB Nag and everytime so far I did not have to FF to where I was in the show. It is a huge help when watching a show that is long. The only problem is that you must must must press OK within 2 to 3 seconds of the HUB NAG. It will bring you back to the menu with a RESUME play option.
0 Likes