Customers With Disabilities
 
quick menu

Preparing to switch from using old TV to a newer LCD HDTV

Reply
Contributor
Posts: 3
Registered: ‎11-20-2013

Preparing to switch from using old TV to a newer LCD HDTV

Message 1 of 3 (257 Views)

I'm pretty sure the sensors on my old tube TV are no longer working, because none of my FiOS remote devices works well any more. (I replaced batteries, cleaned TV surfaces, tried 3 different FiOS remotes.)

 

When FiOS was installed in my home, the technicians hooked up an HDTV in a spare bedroom. My "main" hook-up was with the old TV. It's where the multi-room DVR hook-up is.

 

Can I simply replace the old TV with the newer HDTV? Or how should I research whether I have the correct FiOS equipment to replace the old tube TV with the HDTV?

 

Here is the equipment I have:

 

  • Model:QIP7232-P2
  • U/A:0000047224690244

I think the above is my "main" hook-up because Verizon calls this DVR 1.

 

  • Model:QIP7100-P2
  • U/A:0000047743300028

I think the above is my 2nd/HDTV hookup in the spare bedroom.

 

Thanks in advance.

2 REPLIES
Silver Contributor III
Posts: 991
Registered: ‎11-06-2012

Re: Preparing to switch from using old TV to a newer LCD HDTV

Message 2 of 3 (252 Views)

Both of the models you named are HD STBs.   So all you need to do is connect your new HDTV.

Silver Contributor III
Posts: 2,070
Registered: ‎08-07-2008
Location: Long Beach, California

Re: Preparing to switch from using old TV to a newer LCD HDTV

Message 3 of 3 (236 Views)

walt178 wrote:

Both of the models you named are HD STBs.   So all you need to do is connect your new HDTV.


...ideally with an HDMI (or component if necessary) cable so that you get full HD.

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
 

My Verizon

  • Check Email
  • Add or Change Services
  • Suspend My Service
  • Manage Services

Support

Watch Fios