I purchased a Samsung LED TV last week and all was fine until 2 days ago when the DVR would not respond to the remote. Sometimes it acted like a button was pressed several times, other times, it ignored the input. When on the guide, I would press the channel up and down to page up or down and it would ignore the request the first time or two. then it would act like the wheel on the price is right and keep scrolling through all the channels even when the remote had no batteries in it.
Any ideas????
'servicing' the remote control isn't an especially high priority on the DVR. If it is busy doing something else (I have no idea what, but I have seen it happen many times). It does in fact 'save' the button press and queues them. What usually happens is you end up pushing the buttons many times because nothing happens, and at some point, the DVR suddenly processes all of the queued remote control button presses.
You can tell if the remote control button was recognized because if it is, the power light on the QIP 7232-2 will flash to indicate the command has been received. If nothing happens immediately, it generally means for whatever reason the DVR is buy doing something else, and will get around to processing the command eventually. If you keep pressing the buttons, it queues them up, and later executes ALL of THEM!
Start a new topic or ask questions in the open forum.
