×

Switch Account

STB fios to multiple VCR

STB fios to multiple VCR

SOLVED
Reply
Highlighted
Silver Contributor II
Silver Contributor II
Posts: 371
Registered: ‎10-23-2008
Message 11 of 11
(1,683 Views)

Wish I were there to help you troubleshoot it. The reason that I laid out all the steps the way that I did rather than just jump to the punch line was to help you troubleshoot the problem yourself. You did mention that you were able to get it to work just fine with coax through VCR1. But, did you try the next step of running it through VCR2 without VCR1? The reason I put this step in was just in case you have a bad VCR. I have a VCR that was struck by lightning several years ago. When it is on, it works fine. When it is off, it blocks the throughput signal.

 

Make sure that both VCRs and the TV are tuned to channel 3 when on. You may also want to check around on the VCRs for a switch that would allow you to toggle this setting between channel 3 and channel 4. It should be a small physical switch usually located on the back near the inputs. Make sure it is set to CH 3.

 

Unless your TV blue-screens when it gets snow, a blue screen is an indication that at least one of your VCRs was on, but tuned to a station that was snow. It blue-screened you to keep you from getting static blasting through the speakers.

 

The way you mentioned hooking it up with composite could work. Then you would have to switch the TV input from channel 3 to Input 'X' when you wanted to use the VCRs. But this would still leave you unable to record TV, unless you solved your original problem. Also, sometimes the composite cables do not allow throughput, meaning they block the signal when the VCR is off. You can try it. It won't hurt anything. But you might still run into some of the same issues.

 

(Looks like I was slow on the draw and you've already found a workable solution. Maybe next time.)


Find this post helpful, informative or just something you agree with? Click the red ‘thumbs-up’ button.
Did this post solve your problem? Click the green ‘Accept as Solution’ button.

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Covid19


Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.