|This is the last time your account was accessed.|
06-27-2011 12:44 PM
I just had FiOS installed with the CHS 435HDC DVR box. The Slingbox website says it's not a supported set-top box. Is there anything I can do? Or will I have to cancel FiOS in a matter of hours after it being installed?
06-27-2011 01:01 PM
The only thing that can be done at this time is to contact slingbox for any support. Verizon will not be able to assist you with this issue. Even if you disconnect/reorder fios video service. You will still get the same equipment. It's based off of what the engineers built outside.
06-27-2011 09:15 PM
Is the Slingbox not meant to work with FiOS, or is it that it won't work with that particular Cisco box?
If the latter, see if some other Cisco box is listed. They may use the same remote codes.
Also, maybe the Slingbox can work with a different FiOS set top box offered in your area. Maybe one of the simple ones meant for old analog TVs, if the Slingbox can take an RF signal on channel 3 or 4.
06-28-2011 04:16 AM
This can't be correct. FiOS has been available here for far longer than the introduction of the Cisco DVR. So other equipment must be compatable.
06-24-2012 08:21 PM
Just a heads up that this worked great, even two years after the last post. Thanks for providing an accurate work-around for the newer Cisco FIOS boxes.