Hello. I have FIOS TV, Internet, and phone service. I had a TV in room A and my router in room B. Then, we flipped rooms, and I moved the router to room A and the TV to room B. The router seems to be working fine using the cable that had previously serviced the TV, but the TV is having some trouble using the cable that had previously serviced the router. My Guide doesn't get any program description data, and the On-Demand menus fail with an error saying that there is a problem retrieving data.
In short, the TV doesn't seem to be getting all of the data it needs through the cable that used to service my router. I was wondering if anybody had any suggestions on how to fix this. I'm scheduling a visit from a technician, but I'd like to save the related charges, and thought I'd solicit some advice in advance. Thanks very much for your time.
02-19-2009 06:15 AM - edited 02-19-2009 06:18 AM
I replied to a similar post a few days ago.
My thought was the STB booted up first and the router booted up second. The STB didn't get an IP on boot up and may have stopped trying.
My solution was to reboot the STB to see if it can get an IP from the router. Any boxes not moved should still work because they kept their old IP's and would only worry about DHCP when their lease started to expire but the the moved STB will try to communicate with the router to as part of normal DHCP startup.
Edited: Just realized that this is the same poster who also posted in the Internet Forum. So basically the same solution.