Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.

Switching Places of TV and Router

Reply
CantThinkOfName
Contributor
Contributor
Posts: 2
Registered: ‎02-17-2009

Switching Places of TV and Router

Message 1 of 3
(3,647 Views)

Hello. I have FIOS TV, Internet, and phone service. I had a TV in room A and my router in room B. Then, we flipped rooms, and I moved the router to room A and the TV to room B. The router seems to be working fine using the cable that had previously serviced the TV, but the TV is having some trouble using the cable that had previously serviced the router. My Guide doesn't get any program description data, and the On-Demand menus fail with an error saying that there is a problem retrieving data.

 

In short, the TV doesn't seem to be getting all of the data it needs through the cable that used to service my router. I was wondering if anybody had any suggestions on how to fix this. I'm scheduling a visit from a technician, but I'd like to save the related charges, and thought I'd solicit some advice in advance. Thanks very much for your time.

2 REPLIES 2
Provider7
Silver Contributor III
Silver Contributor III
Posts: 428
Registered: ‎10-11-2008

Re: Switching Places of TV and Router

Message 2 of 3
(3,602 Views)
DO you have other set top boxes in the house?  If so do they retrieve the guides and menu's ok?  The cables feeding the tv and router...are they original coax, or were they installed new with the service?  If they are existing...how are the coax connections...are they pressure fit, or screw on.  Essentially your looking for a possible bad connection.
chartle
Nickel Contributor
Nickel Contributor
Posts: 34
Registered: ‎02-03-2009

Re: Switching Places of TV and Router

Message 3 of 3
(3,554 Views)

I replied to a similar post a few days ago. 

 

My thought was the STB booted up first and the router booted up second.  The STB didn't get an IP on boot up and may have stopped trying.

 

My solution was to reboot the STB to see if it can get an IP from the router.  Any boxes not moved should still work because they kept their old IP's and would only worry about DHCP when their lease started to expire but the the moved STB will try to communicate with the router to as part of normal DHCP startup.

 

Edited: Just realized that this is the same poster who also posted in the Internet Forum.  So basically the same solution.

Message Edited by chartle on 02-19-2009 09:18 AM
How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title