09-14-2019 09:26 AM
We have an LG TV, Fios DVR box, and a Denon receiver. When we turn the TV and STB on with the Fios remote, the receiver switches input off of the cable setting (although it takes 10-15 seconds for it to do so). Is this a problem with the remote, the STB, or the receiver ? Any ideas how to fix it ? Thanks.
Solved! Go to Solution.
09-14-2019 07:18 PM - edited 09-14-2019 07:31 PM
You need to switch off "TV input control" in the audio and video, video settings menu on the cable box.
09-15-2019 05:29 AM
It would be extremely useful if when you answered you also included
Equipment Model Nos. ?
Set Top Box DVR
If you are the original poster (OP) and your issue is solved by clem53, please remember to let all of us know and click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
09-15-2019 05:01 PM
Very helpful, thanks - only I don't have that setting. Under Audio $ Video/Video Settings, I only have settings related to the TV format. I'll look for TV input control under other menus.
09-16-2019 05:38 PM
Ok, try this: on the Denon menu, setup, video, HDMI setup, TV audio switching, turn OFF. That should do it.
09-17-2019 04:33 PM
THANKS ! It was a setting on the Denon - not quite the same one, but I figured it out based on your advice. You've solved a big problem for us !