Universal Remote with Emerson 32" LCD Not Working
ajmboy
Enthusiast - Level 1
I just bought an Emerson 32" LCD HDTV  and can't get the remote programmed for the TV.  I tried all the codes in the manual and online, but nothing worked.  I also tryed to program it manually, and still nothing worked.  I tried the following codes:

0181   0263   0490   0207   0205   0198   0650   3005   3008   3010   3011   3012   3013   3015   3025   3031   3186   3203   3204   3218

It does not work...are there other verizon remotes or new codes?

0 Likes
Re: Universal Remote with Emerson 32" LCD Not Working
PJL
Master - Level 3

@ajmboy wrote:
I just bought an Emerson 32" LCD HDTV  and can't get the remote programmed for the TV.  I tried all the codes in the manual and online, but nothing worked.  I also tryed to program it manually, and still nothing worked.  I tried the following codes:

0181   0263   0490   0207   0205   0198   0650   3005   3008   3010   3011   3012   3013   3015   3025   3031   3186   3203   3204   3218

It does not work...are there other verizon remotes or new codes?


The user guide I have for the FiOS remote shows 0154, 0236, 0463, 0180, 0178, 0171, 0623, and 0185 for Emerson TVs. 

0 Likes
Re: Universal Remote with Emerson 32" LCD Not Working
Hubrisnxs
Legend

the ones from the user guide work pretty well,

0 Likes
Re: Universal Remote with Emerson 32" LCD Not Working
abhi_col
Contributor - Level 3

If none of the codes worked, try this.

Instructions for philips remote. the remote with the big red fios TV button.

Before you begin, the TV should be ON and remote pointing towards the TV

1) Press TV button and hold it down. While holding TV button down, press OK button. Release both keys at the same time.( All the 4 device keys on the top of remote should flash)

2) Press the numbers 9-2-2.

3) Press the upper part of PLAY button once.

4) Continue pressing FASTFORWARD button slowly again and again until the TV turns off. (This step is searching for correct code as the FASTFORWARD button is pressed)

5) If the TV turns off, press OK button. It will store the code.

Good luck. Smiley Happy

0 Likes
Re: Universal Remote with Emerson 32" LCD Not Working
kiwidrop
Enthusiast - Level 1

I've been having the same problem. Have you found a solution yet? I also tried the 9-2-2 thing for all the codes in the book and nothing worked.

0 Likes
Re: Universal Remote with Emerson 32" LCD Not Working
ncman
Newbie

None of the codes works for my Emerson 32" (bought from Wal-Mart about 2.5 years ago). Tried running 922 as well.  So now we have a Direct TV remote that won't control its TV and a FIOS remote that won't control its TV.  Apparently, this is rocket science.

0 Likes
Re: Universal Remote with Emerson 32" LCD Not Working
spacedebris
Master - Level 2

Emerson is a "generic" TV. Built by the lowest builder. A lot of the "generic" TV's (emerson, symphonic, radio shack, etc) use IR frequecies that are unique rather than the "standards" used by many other tv's. Its not possible to make every universal remote work on every tv. They just work on "most" tvs. If the VZ remote doesnt work for it, you can always purchase a universal remote that does work for your TV and then program IT for the verizon box. The verizon box works on standard motorola codes.

0 Likes